The Main Menu displays twelve configurable functions and two exit choices. To find out which version to use, consult the vendor of your operating system. You will be prompted to confirm the password. Selecting [Auto] allows the mainboard to detect whether an audio device is used. Avoid clearing the CMOS while the system is on; it will damage the mainboard. You can clear CMOS by shorting pin while the system is off. This prevents an unauthorized person from changing any part of your system configuration.
|Date Added:||28 October 2014|
|File Size:||41.79 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The module will only fit in the right orientation. T is a utility that monitors your disk status to predict hard disk failure. To find out which version to use, consult the vendor of your raod system. The openings on the enclosure are for air convection hence protects the equipment from overheating.
MSI P Neo-V – motherboard – ATX – Socket – iP Overview – CNET
Avoid clearing the CMOS while the system is on; it will damage the mainboard. The CPU can only fit radi the correct orientation. The S-Bracket offers 2 SPDIF jacks for digital audio transmission one for optical fiber connection and the other for coaxialand 2 analog Line-Out jacks for 4-channel audio output.
Keep this equipment away from humidity.
Press the two levers down to fasten Press down the fan until its four clips get wedged in the holes of the retention mechanism. Installing DDR Modules 1. Settings range from  to  at a 32 increment.
Instruction manual | MSI 848P Neo-V Motherboard
We recommend you to check if your memory is able to bear MAT setting or not before deciding to always use it. Disable the function if you want to use other controller cards to connect an audio device.
ndo-v The gold arrow should point towards the lever pivot. It introduces a 66MHz, bit channel for the graphics controller to directly access main memory.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. Notice 2 Shielded interface cables and A. BIOS Setup defaults rair stable performance settings for all devices and the system, while High Performance defaults provide the best system performance but may affect the system stability.
The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
Settings are described below: For more information on Hyper-threading Technology, go to: We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents.
However, the same type and density memory modules are necessary while using dual-channel DDR, or unstability may happen.
This item allows you to set the type of the floppy drive installed. While doing the installation, be careful in holding the components and follow the installation procedures. Available settings for each item are: Selecting [Auto] allows the mainboard to detect whether an audio device is used.
If you find the PC appears to be unstable or reboot incidentally, it’s better to disable the Dynamic Overclocking or to lower the level of overclocking options. Open Lever Sliding Plate 90 degree 2. Can enter and change the settings of thesetup menu.
Ata Raid Connectors: Ide3 & Ide4 (optional) – Msi E Max2 User Manual [Page 34]
While booting up, the BIOS version is shown in the 1st line appearing after the memory counting. The connector location and pin assignments are as follows: Mounting h 6 mounting holes. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard.